Welcome to:
DSNW Porsche Parts web site. DSNW Porsche parts have the largest, most comprehensive Porsche parts inventory of any OEM/aftermarket supplier. From the 356 to the 997, from the Boxster and Cayman to the new Cayenne: in terms of available part numbers, we sell more parts for more Porsche models than anybody.
Our web site is your gateway to all Porsche parts that are in stock and on the shelf, so you can get the parts when and where you need them. Our online ordering solution is built to be easy to use so you can find what you need to get the job done for every road-going model of Porsche car from the first 356 to the latest 911 (call 888-356-2911) and includes front-engine vehicles and SUVs.
Porsche Models Covered by DSNW:
|
356 |
911 |
912 |
914 |
924 |
944 |
968 |
928 |
986 Boxster |
987
"New" Boxster |
987SC Cayman |
930 Turbo |
964 & 997 Carrera |
993 Carrera/Turbo |
996 Carrera/Turbo |
955 Cayenne |
OE, OEM and OES (Factory) Auto Parts
Auto parts shopping - particularly for import cars - can be very
difficult if you don't understand the differences among brands. Let's
clear up some misconceptions so you aren't tempted by inferior aftermarket
parts that can actually do more harm than good - often costing you
much more in the form of major auto repairs!
OEM (original equipment manufactured) and OES (original equipment
supplied) many times are one and the same. OE, of course, is a more
generic term that refers to the brand that came as original equipment
on the car. Most auto manufacturers assemble cars from purchased components
and manufacture only the sheet metal components.
Therefore, the "factory part" you can buy from your dealer was most
likely made by another company, sold to the car maker and then resold
to the dealer for ultimate sale to you.
An important point many people are unaware of is the fact that multiple
OES brands are not only normal but are actually mandated by international
standards as part of the qualifications for ISO certification. Car
manufacturers must have secondary sourcing (i.e., multiple suppliers)
for certain types of parts in order that any problems with one supplier
will not disable the car manufacturer's production and allow for substitution
of the other brand for new production and any warranty replacement
or repairs.
As an example, the original VDO pump may be interchanged with the
Bosch unit with equal performance, the ZKW fog light may be interchanged
with the Hella unit or the Balo brake rotors replaced with Zimmermann.
Further, many parts manufacturers are considered OES when, in fact,
the exact same parts came on the car under a different brand name.
We continue to strive to offer the direct OE replacement under whichever
brand name is available.
We deal directly with many OEM/OES companies and stock the exact
same parts as your local dealer - usually at substantially lower prices!
It may not always come in a package with the car maker's name but
it is, in fact, the very same part, manufactured by the very same
company.
Why pay for all those middlemen when you can get the exact same part
at DSNWParts.com? DSNWParts.com strives to supply one or all of the
original equipment brands when available - usually the most commonly
used brand is the more available one at a cost savings that we can
pass along to you, our valued customer.
That's why our price may be 20%-90% below your dealer's price. You're
not skimping on quality - it's the same quality as the dealer's part.
You're just cutting out the overhead caused by too many middlemen.
Dealer Only Parts
"Why doesn't the aftermarket have replacement parts for my 2006-7
model cars?" All too often we hear this question on non-maintenance
type parts and it's frustrating for both you and for us. Most cars
will require some repair work in the first or second year. Unfortunately,
some parts for these repairs may still only be available through the
dealers.
Often OEM and OES companies cannot release OE parts for "new" cars
into the aftermarket (because of licensing agreements) until a few
years have passed. This restriction allows the car maker to recoup
tooling costs, build in repair revenues for the dealers and justify
larger OEM production runs to keep costs down.
Although irritating that some parts are "dealer only", it's in your
best interest for warranty purposes. As new car warranties get longer,
the dealer must maintain cars that fail to perform for longer periods
of time. In the case of emission-related parts, the U.S. government
has regulated many of these warranties to keep up with EPA rules.
So if you're driving a newer car, you may need the dealer for a few
more years on certain items.
OEM/OES vs. Aftermarket Parts
The true "aftermarket" part is one that's been copied from the OE
part. In many cases, this is done to offer a lower cost alternative.
But in most cases the benefit of the lower price is far outweighed
by its major disadvantage - it's usually an inferior product and ends
up costing you much more in the end in avoidable repairs.
There are, of course, exceptions to this rule as car makers try to
reduce assembly costs by going to lower cost alternatives on parts
that wear out and routine maintenance parts.
But, beware: Aftermarket parts stores - the big name mass merchandisers
you find on every street corner - normally carry ONLY "aftermarket"
copies of OE parts. It's the most cost-efficient way for them to compete
on price with the thousands of other parts stores. Besides, most of
their customers care more about price than performance anyway!
OEM/OES Brands Available at DSNWParts.com
DSNWParts.com doesn't believe in cheap aftermarket imitations. We
won't sell inferior parts. We found that over 95% of our customers
insist on OEM parts for quality and exact fit. Our customers know
how important fit, performance and quality are and they want to get
the highest quality parts possible for their car repairs - those that
fit and work like factory-original, OEM parts.
We routinely test new brands to find the highest quality products
for our customers. Our suppliers have spent several years researching
the best available brands for each and every type of part we sell.
And, we only stock those brands that meet our stringent price/quality
requirements - the best available part for the job!
We also believe in giving customers choices. Many parts are stocked
in both the OEM/OES brand and a lower cost alternative that's at least
equal to the quality of the OE brand. This gives you the choice between
the OE part and a higher quality alternative.
Here are just a few OEM/OES brands stocked at Driving Source NW
for Porsche and other fine European cars.
Robert Bosch Company is the single largest parts supplier for European cars. What started
as Robert Bosch's "Workshop for Precision and Electrical Engineering"
over 100 years ago, has become one of today's most successful engineering
enterprises.
Pioneers of fuel injection technology over 30 years ago, Bosch is
the industry leader in fuel injection and is the major OE supplier
to nearly all car manufacturers worldwide. Bosch developed the first
fuel injection system with a high-pressure electric fuel pump in 1967
and continues to pioneer innovative designs and technology.
Bosch ignition systems are OE on most European cars and have been
for many, many years. Whether it's an old points-and-condenser type
distributor or the latest high-tech distributorless ignition system,
Bosch built the unit for the car marker. The replacement parts - from
cap, rotor, points, condenser and Hall sender to distributorless coils
and connectors - are all the original parts or the updated version
of them from Bosch.
Bosch also offers the best warranty in the marketplace. They stand
behind all products for a minimum of 12 full months, unlimited mileage!
They also provide a 2-year roadside assistance warranty on starters
and alternators - they'll pay for your jump start or tow should one
of these products fail. And, Bosch offers a lifetime warranty on all
of its spark plug wire sets.
Bosch manufactures thousands of different components for cars - from
fuel pumps to air flow meters to electronic switches and relays to
headlights and filters. In fact, Bosch is the OE brand at most car
manufacturers worldwide.
As a Bosch Warehouse Distributor, Driving Source NW stocks thousands
of Bosch products for your car. Is it any wonder people worldwide
come to Driving Source NW for all their Bosch product needs?
Sachs-Boge (part of
ZF Trading North America's group of companies) includes Boge suspension
(shocks/struts, bushings, etc.), Boge rubber-to-metal (engine mounts,
suspension mounts, bushings, etc.), Stabilus gas springs (hood, trunk
and tailgate shocks, convertible top cover supports, etc.), Fichtel-Sachs
drivetrain (clutches, fan clutches, etc.) and Mintex brake products
(Mintex/Textar brake pads).
Boge suspension and rubber-to-metal have been the European supplier
of shocks/struts, bushings and mounts to the auto makers since 1931,
with manufacturing plants in 72 countries around the world. With their
outstanding lifetime warranty of shocks/struts, you never have to
worry about the performance and longevity of the parts.
Fichtel-Sachs/Borg&Beck clutches have been original equipment on European cars in one form
or another for over 100 years. Still the world leader in clutch
technology and innovation, Sachs clutches are found in cars the
world over, including US car makes.
Mintex brake products
also have over 100 years experience supplying the auto makers of
Europe, including the manufacture of Textar OE brake pads on Mercedes.
It was the first brake pad company in Europe to earn the new "Regulation
90" approval for safety in meeting or exceeding OE specifications
on its pads. All the pads are built to OE specifications for material
compound, are non-asbestos for health safety and are low dusting
for cleanliness of your wheels.
Sachs' Stabilus/Lift-O-Mat brand is the major supplier of hood, trunk and tailgate shocks on
all European cars. The replacements are exactly the same specs as
that which was on your car on the showroom floor so you know when
you buy Stabilus you'll be able to restore the lift that you expect
when you open your door.
Once again, Driving Source NW stocks a large assortment of Sachs
and Boge products - all of which are OEM/OES and are either on your
European car already or are factory-approved as a replacement part.
And, like Bosch, Sachs stands behind their products with a minimum
12-month warranty - lifetime on shocks.
ATE supplies brake
and hydraulic components as an OE supplier to most European car makers.
From calipers to master cylinders to brake discs, brake drums and
much more, somewhere on your car is the name ATE!
Balo brake rotors were
the OE brand on BMWs throughout the 1990s and continue to be the major
supplier to European car makers. For quality of manufacture, resistance
to warping and superior fit and performance, Balo is the professional's
rotor of choice for most BMW models.
Bando is the OEM belt
of choice for all Asian cars. It's designed to properly fit the pulley
grooves at the correct ride level to give superior performance and
durability.
Behr has long been
known for its refrigeration and cooling system parts on Mercedes Benz
and BMW. From A/C parts to radiators and thermostats to A/C control
systems, Behr is the OE brand on many European cars. Through its worldwide
affiliations with other companies, its name is also found on many
replacement refrigeration and cooling system parts for other makes
of automobiles.
Brembo brake discs,
designed specifically for the Formula One racing circuit, are now
offered for street use. Since 1961, Brembo has been the exclusive
supplier of brake calipers to Porsche and brake rotor supplier to
racers worldwide (FIA Rally, Formula One, CART, NASCAR, Porsche, Ferrari
and more). You can't do any better for fit and performance than Brembo.
Continental (aka CRP,
Conti, or Conti-Tech), according to most experts, is the only belt
you should put on European cars. Continental is an OE supplier and
its superior, service-free belts outlast any other brand on the market.
Continental also produces many of the OE hoses found on your car.
Febi Bilstein is known
for OE suspension and steering systems. From Bilstein shocks and struts
to Febi bushings, tie rods and control arms, you're assured of high
quality products from Febi Bilstein.
FHE is synonymous with
BMW radiators but it also manufactures replacement radiators for other
European cars. Used first as the factory replacement brand by BMW,
it is considered one of the top quality radiators for all applications
for which it is available.
Fichtel-Sachs clutches
- see Sachs Boge above.
Fahrzeug Technik Ebern (FTE)-FAG is world-renowned for its bearings, tensioner assemblies and hydraulic
cylinders. Again, another brand name that probably came as standard
equipment on your car.
GK, a division of Kolbenschmidt,
is an OE manufacturer of water pumps. They offer superior quality
and performance for German cars.
Jurid brake pads (a
division of Bendix/Allied Signal) were the OE brand on BMWs throughout
the 1990s and continue to be the major supplier in Europe. For fit,
finish and performance, you can't do better than Jurid for your BMW.
Kolbenschmidt is an
OE brand name that can be found on hundreds of quality metal parts
throughout the European car market - engine blocks, pistons, bearings,
induction pipes, water pumps and other high-grade components. With
such diverse and time-tested engine experience, Kolbenschmidt is a
testimonial to "competence around the engine".
Laso offers superior
quality OE water pumps for Mercedes and BMW.
Lemfoerder is the OE
brand for heavy metal parts on most BMWs, such as control arms, support
arms and bushings. Lemfoerder is always the highest quality original
equipment (OE) brand you can find. Now also known for many other automotive
parts and kits, you can count on Lemfoerder to be a perfect fit every
time.
Loebro, a division
of GKN Drivetech, is the OE CV joint, U-joint and axle boot king for
European cars. GKN is the largest manufacturer of new OE constant
velocity products with over 40% of the total world market. In fact,
GKN has been the world leader in front-wheel drive engineering for
almost 40 years.
Lucas-Girling is another
large OE manufacturer of brake and hydraulic products. If you have
a European car and don't have an all ATE brake system, it probably
has the Lucas-Girling name on it.
Mahle/Knecht, Hengst, Mann-Hummel and
Crosland are all high-quality OE suppliers in Europe
of various automotive filters. Air filters, fuel filters, oil filters,
power steering filters and AC/pollen/micro filters are the most common
maintenance items on cars today and these quality brands will ensure
OE specification service, fit and performance.
Meyle Products, located
in Hamburg, Germany, offers a constantly expanding range of high-quality
steering and suspension products (tie rods, center/drag link, control
arms, support arms, ball joints, bushings and kits and more) for European
cars.
Mintex brake pads -
see Sachs Boge above.
Nissens is a Danish
alternative radiator brand for Audi, BMW, Mercedes Benz, Saab and
Volvo. These radiators incorporate all the latest updates to OE specs,
fit exactly as the original brands and are often a more cost-effective
solution than the OE brand.
NSK, GMB, KML and FCC - These four Asian manufacturers offer a wide range of OE components
(bearings, water pumps, clutches and more) for European cars. Superior
design and durability make these products the best you can buy for
European cars.
Pagid brake pads are
an OE or better alternative brand and are preferred by many professionals
for numerous European cars. As an OE supplier of brake pads for Audi,
BMW, Mercedes, Saab, Volkswagen and Volvo, these pads have the most
up-to-date formulation and shims for optimal performance and noise
reduction.
PBR Deluxe (Axxis, Repco, MetalMaster) is a brand that's changed its name several times over the past several
years but not its high quality. Although not OE on any car, PBR Deluxe
brand pads are a popular replacement brand for most car makes. In
the standard "Deluxe" line, they produce an organic pad that performs
quietly and cleanly on your import car. The "MetalMaster" line of
full metallic pads are a durable, high-quality, all-metallic pad designed
for certain applications to either replace semi-metallics or extend
pad life.
Pierburg appears on
several fuel pumps in Volvo and Saab cars and is an excellent alternative
for many other cars. The compact design and quiet operation of the
Pierburg pumps are renowned.
SKF is the leading
global supplier of products, solutions and services in the rolling
bearing and seals business. SKF was founded in Sweden in 1907 and
currently operates 76 production sites in 22 countries. They are reknowned
for their high quality products for a wide variety of car makes.
Stabilus hood, trunk
and tailgate shocks - see Sachs Boge above.
Textar brake pads are
the OE pads on most Mercedes-Benz cars and have been for many, many
years. Formulated for quiet operation and high performance, there
are no better pads for most Mercedes original applications.
VDO-Siemens is world
renowned for its electrical parts, pumps, sensors and switches. An
OE brand on many European cars, VDO is now part of the Mannesmann-Sachs
group of companies. This partnership merges their respective areas
of long-established expertise and sets new standards in automotive
design by fusing technological know-how with a dynamic, synergistic
approach.
Victor Reinz, Goetze, Meistersatz,
ElringKlinger are the four companies representing
nearly every OE gasket or seal found in European cars. If you need
a seal or gasket - from valve cover gaskets to head sets to axle seals
- it will probably have one of these names on it at Driving Source
NW.
Zimmermann brake rotors
were our original and only Porsche brake rotor supplier but they have
expanded tremendously over the past few years. The quality is second
to none as replacement on all late model import cars - not just Porsche
- with the high demand on ABS high-pressure systems. Heat fade resistance
and longevity are Zimmermann's strong suits and Zimmermann brake rotors
are one of your best buys for great braking performance. |